 |
499 New Industrial Park Road Laurens, South Carolina 29360, USA Phone: 864.682.5178 Fax: 864.682.5186 E-mail: mail@uniforbrass.com Home |
|
Unifor Brass Forgings can meet your expectations on brass components from a few ounces up to approximately 5 lbs. with parts forged into a wide variety of shapes. |
| Copper Alloy Properties: | Mechanical (1): | Physical (1): | Fabrication Ratings: | |||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Forging Brass: Cu 59% Zn 39% Pb 2% | C37700 | 23,000 | 58,000 | 40 | 45 | 0.305 | 27 | 69 | 100 | 80 |
| Naval Brass: Cu 60% Zn 39.25% Sn 0.75% | C46400 | 26,000 | 64,000 | 40 | 55 | 0.304 | 26 | 67 | 90 | 30 |
| Leaded Naval Brass: Cu 60% Zn 37.5% Pb 1.75% Sn 0.75% | C48500 | 24,000 | 62,000 | 40 | 55 | 0.305 | 26 | 67 | 90 | 70 |
| Electrolytic Tough Pitch Copper: Cu 99.9% min Oxygen 0.04% min | C11000 | 11,000 (4) | 33,000 (4) | 50 (4) |
37F (4) | 0.321 | 100 | 226 | 65 | 20 |
| Tellurium Copper: Cu 99.5% Te 0.5% | C14500 | 11,000 (4) | 33,000 (4) | 20 (4) |
40 (4) |
0.323 | 90 | 215 | 65 | 85 |
| Manganese Bronze: Cu 58.5% Zn 39% Fe 1.4% Sn 1% Mn 0.1% | C67500 | 35,000 | 68,000 | 27 | 65 | 0.302 | 24 | 61 | 80 | 30 |
| Aluminum-Silicon Bronze: Cu 91% Al 7% Si 2% | C64200 | 38,000 | 79,000 | 30 | 78 | 0.278 | 8 | 26 | 80 | 60 |
| (1) Properties listed below are average values as forged, suitable for general engineering use, but they should not be used for specification purposes due to commercial variation in production. |
© 1999, Unifor Brass Forgings, Inc. All Rights Reserved Home |
| (2) Electrical Conductivity % IACS annealed at 68°F | |
| (3) Thermal Conductivity BTU/sq.ft./hr/°F at 68°F | |
| (4) Soft |